Amp Loop
To Amp Input
From Amp FX Send
to Left (Mono) Input
The Amp Loop connection can be used if your amp has an effects loop.
Connect the guitar to the amp's input. Connect the amp loop's Send jack to
the JamMan
Delay's
®
Output to the amp loop's Return jack.
(MoNo)
If the amp's effects loop is a serial effects loop (no parallel dry path) set
the
button to OFF. If the amp's effects loop has is a parallel loop,
DRY off
(typically has a Mix control), you have two options:
1.
Set the
DRY off
the JamMan Delay's
effect level.
2.
If your amp has a series effects loop the DRY OFF button should be
OFF. If your amp has a parallel effects loop, the DRY OFF button should
be ON.
Making Connections
Input. Connect the JamMan Delay's
Left (MoNo)
button to be ON and use amp's loop Mix control and
DeLaY LeVeL
From Left (Mono) Output
to Amp FX Return
and
knobs to balance the
LooP LeVeL
Left
21