Storing And Recalling Delay Settings - DigiTech JAMMAN Owner's Manual

Storing and Recalling Delay Settings

The JamMan
®
footswitches allowing instant recall of these settings during performance. When
delay settings are modified by turning the knobs, the
light. To store modified settings to the footswitches, follow these steps:
1. Press the
footSWItcHeS
2. Press any flashing
footswitch (or press the
to the currently active
3. The
DeLaY StoRe
stop flashing and light solid to indicate the new settings have now been
stored to this location.
To recall stored delay settings, press the
You can also store delay settings during live performance (such as a new
tapped tempo) by pressing and holding the active delay memory footswitch
for 3 seconds.
NOTE: Delay settings cannot be edited or stored when the delay effect is
bypassed.
28
Delay's delay settings can be stored to any of the numbered
button. This button will now be lit and the
DeLaY StoRe
will begin flashing.
DeLaY footSWItcH
DeLaY StoRe
DeLaY footSWItcH
button will turn off and the active footswitch will
DeLaY StoRe
to store the settings to that
button again to store the settings
).
DeLaY footSWItcH
button will
DeLaY
they were stored to.