Table of Contents
Advertisement
Guided Tour
Front Panel
1. Amp Model - This knob is used to select the Amp Model for the active green or red amp channel (indicated by the
color of the amp parameter LEDs). One green and one red LED light indicating the selected Amp
Models for both Channels. If both Amp Channel's have the same Amp Model selected, one yellow
LED lights.
2.Tap-It - This button is used to synchronize the Delay repeats with the tempo of the music. Tapping this button sets
the Delay time at the rate in which it is tapped. Press TAP-IT and EDIT simultaneously to access the
Assign menu. When in Utility mode, TAP-IT selects the previous menu. When in Store or Amp Save
mode, TAP-IT selects the previous character when naming presents and user HyperModels™.
3. Edit - This button is used to edit selected effects. The effect LEDs indicated the selected effect. Successive presses
of the Edit button advance through all available effects. Press EDIT and TAP-IT simultaneously to access the
Assign menu. When in Utility mode, EDIT selects the next menu. When in Store or Amp Save mode, EDIT
selects the next character when naming presents and user HyperModels™.
4. Effects LEDs - In performance mode, the effect LEDs provide a visual indication of the active effects in the the
selected preset. In Edit mode, they indicate the effect currently selected for editing.
5. Effect Parameter knobs - In Performance mode, these knobs control the most commonly adjusted effect
a. Speed/Amount/P1 - In Performance mode, this knob adjusts the Speed of the selected Modulation effect,
b. Speed/Amount/P2 - In Performance mode, this knob adjusts the Depth of the selected Modulation effect.
PICKUP - WAH
PRESET
COMP - GATE
WHAMMY / IPS
CHORUS / MOD
DELAY
REVERB
TAP-IT
EDIT
SPEED / AMOUNT
DEPTH
ASSIGN
P1
P2
P3
parameters. In Edit mode, these knobs adjust the parameters of the selected effect.
or the Amount of the selected Pitch Shift or Detune effects. In Edit mode, this knob
adjusts the first parameter of the selected effect.
In Edit mode, this knob adjusts the second parameter of the selected effect.
VALUE
DATA / PRESET
MOD LEVEL
DELAY LEVEL
REVERB LEVEL
AMP SAVE
UTILITY
P4
P5
Introduction
STORE
3
Advertisement
Table of Contents
