Table of Contents
Advertisement
Foot Controller Options
The Genesis3 can be remotely controlled using the optional Control X Foot Controller (or any MIDI controller).The
Control X is a full function foot controller with 8 switches and an expression pedal.The Control X will change Presets,
toggle Amp Channels, and turn on and off the Chorus/Mod Effects, and Delay.The Control X displays the active Preset
number, and provides access to the Tuner as well as Tuning indicators.The Control X's expression pedal controls any
assignable Parameter including Volume,Whammy, and Wah.The Control X connects to the MIDI In/FC jack on the
rear panel of the Genesis3, and is phantom powered from the Genesis3. A switch on the rear panel of the Genesis3 is
used to select whether the jack will be used with the Control X and provide the phantom power, or as a MIDI input.
The Genesis3 requires that the Expression Pedal on the Control X be calibrated in order to function correctly.The fol-
lowing steps outline the procedure to Calibrate the Pedal:
1.Turn the Genesis3's Power switch to the off position.
2. Press and hold the Tuner/Utility button while turning the Genesis3's Power switch on.The Genesis3's Display will
read CA (abbreviation for Calibrate).The Display on the Control X will show the software version followed by Pb
(abbreviation for Pedal back).
3. Rock the Expression Pedal back to the toe up position, and press any footswitch.The Control X Display now reads
PF (abbreviation for Pedal forward).
4. Rock the Expression Pedal fully forward to the toe down position and press any footswitch.
This completes the Pedal Calibration procedure. If an error occurs during the Calibration, the Control X Display will
read Er followed by Pb and the Calibration procedure must be repeated.
G
E
™ Editor/Librarian
EN
DIT
The creative flexibility of the Genesis3 is impressive by itself. However, the possibilities are endless when you install the
G
E
™ Editor/Librarian software in your home computer. Before installing the G
EN
DIT
connect the MIDI out from your computer to the MIDI In on the Genesis3. Connect from the MIDI Out on the
Genesis3 to your computer's MIDI In.Then insert the G
PC
If the G
E
™ setup window does not appear on your monitor automatically, just select Run from your start menu,
EN
DIT
and double click on the Setup.exe file in your CD ROM drive.The G
includes help menus to answer any questions, as well as guide you through programming and controlling the Genesis3.
Mac
If the G
E
™ setup window does not appear on your monitor automatically, double click on the CD icon in your
EN
DIT
desktop.When the G
E
EN
information and instructions for running the G
are finished with the Read Me file, close the document and double click on the Installer icon and follow the installation
instructions from there.
™ window opens, double click on the "Read Me" file.This document will provide the latest
DIT
E
EN
E
™ CD ROM into the CD ROM drive on your computer.
EN
DIT
E
™ Editor/Librarian software is intuitive and
EN
DIT
™ software.You may want to print this document out.Once you
DIT
Other Functions
E
™ CD in your Mac or PC,
EN
DIT
37
Advertisement
Table of Contents
