More Favorite Channels - Universal Remote Control AVEX R6 - SPECS SHEET Owner's Manual

More Favorite Channels

You can also use the "A, B, C and D" buttons to pro-
gram favorite channels. Each button can program up
to 5 favorite channels (or a total of 20 button press-
es), but you're not limited to using these buttons for
only that. You can record any series of button presses
into a macro. This is great switching video or audio
sources. Here is an example of how to program a
macro on the "A" button with three favorite channels.
We'll use "25, 50, and 75."
STEP 1: Press the device you are getting channel
STEP 2: Press and hold the "A" button and "Mute"
STEP 3: Press "2".
STEP 4: Press "5".
STEP 5: Press "Select".
STEP 6: Press "Stop".
STEP 7: Press "5".
STEP 8: Press "0".
STEP 9: Press "Select".
STEP 10: Press "Stop".
STEP 11: Press "7".
STEP 12: Press "5".
STEP 13: Press "Select".
STEP 14: Press "Stop".
STEP 15: Press "Channel Up" to save macro.
Note: Pressing the "Select" button just assures the
quickest response from the Cable box. Pressing
"Stop" allows you to program several favorite chan-
nels on one button. Now, the first press of the "A"
button will change the channel to "25." The second,
to "50" and the third, to "75." Then the sequence
starts all over again.
control from. Ex. Cable.
button at the same time until a device
button lights up.
Page 18