Erasing Simplesound & Other "Punch Through" Commands - Universal Remote Control AVEX R6 - SPECS SHEET Owner's Manual

Erasing SimpleSound & Other "Punch
Through" Commands
STEP 1: Press and hold the Component button you
want to erase volume control from, such as DVD or
VCR and the SELECT [SEL] button at the same time
for two seconds until the Component LED light turns
on.
STEP 2: Press the VOLUME UP button and the same
component button from Step 1. The component LED
light will blink three times to confirm the erasure.
VOLUME
UP
Repeat Steps 1--2 to erase SimpleSound commands
from other components.
NOTE: To erase other "Punch Through" commands,
simply press the following buttons in place of VOL-
UME UP in Step 2:
• For Channel Control, press: CHANNEL UP
• For Transport Control, press: PLAY
• For OSD Control, press: MENU
Page 28
COMPONENT
BUTTONS
SELECT