Universal Remote Control AVEX R6 - SPECS SHEET Owner's Manual page 20

STEP 2: Press the VOLUME UP button and then
press either the TV or AUDIO component button that
you want to use for volume. The Component LED light
will blink three times to confirm that it is saved. This
sets up three buttons (Volume Up, Volume Down and
MUTE) as a group for that component.
VOLUME
Repeat Steps 1-2 for all other components.
Note: SimpleSound is what's technically referred to
as a "Punch Through" feature and is not limited to
volume control. It can also be applied to other
groups of buttons. If you find yourself switching to a
particular component mode frequently to access a
particular control, consider using "Punch Through".
UP
Page 20