Setting Up The Management Connection - IBM 87302RU Planning And Installation Manual

Figure 24. Management network diagram

Setting up the management connection

To configure and manage the BladeCenter T unit and blade servers, you must first
set up the remote connection through an Ethernet port on the LAN module. The
LAN module is on the rear of the BladeCenter T unit at the top-right side (see
Figure 25).
KVM module
Figure 25. Location of the LAN module
46
BladeCenter T Types 8720 and 8730: Planning and Installation Guide
TOP TOP
D D
2 1
Alarms
CRT MNR
MJR
2 4
1 3
BTM BTM
E E
LAN module