Table of Contents
Advertisement
BladeCenter HS40 Type 8839 features and specifications for a
NEBS/ETSI environment
Table 6 provides a summary of the features and specifications of the BladeCenter
HS40 Type 8839 blade server operating in a NEBS/ETSI environment.
Note: Power, cooling, removable media drives, external ports, and advanced
Table 6. HS40 features and specifications for a NEBS/ETSI environment
Microprocessor:
Supports up to 4 microprocessors
v Intel Xeon 2.0 GHz or faster
v L2 and L3 caches, size dependent
on microprocessor
Memory:
v Eight DDR PC2100 184-pin DIMM
sockets
v Minimum: 1 GB
v Maximum: 16 GB¹
v Type: 2-way interleaved, DDR,
PC2100, ECC SDRAM registered
x4 (Chipkill) dual inline memory
modules (DIMMs) only
v Supports 512-MB, 1-GB, and 2-GB
DIMMs
v Hot spare memory
Expansion:
v Two I/0 expansion card connectors
Drives:
v Support for up to two Ultra320
SCSI hot-swap hard disk drives
available in an optional SCSI
storage expansion unit
Notes:
1. You might have to enable large-memory support for your operating system to
2. The operating system in the blade server must provide USB support for the
system management are provided by the BladeCenter T Types 8720 and
8730.
Size:
v Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v Width: 5.9 cm (2.32 inches)
v Maximum weight: 7.0 kg (15.4 lb)
Integrated functions:
v Four Gigabit Ethernet controllers
v ATI Radeon 7000 video controller
v Light path diagnostics
v Local service processor
v IDE controller
v RS-485 interface for
communication with the
management module
v Integrated Baseboard
Management Controller
v V2.0 Full Speed ports for
communication with keyboard,
mouse, external diskette drive,
and CD-ROM drive²
v Serial over LAN (SOL)
management interface
Electrical input:
v Input power: 12 V dc
access all of the memory that is installed in your blade server. See the
documentation for your operating system for information.
blade server to recognize and use the keyboard, mouse, external diskette drive,
and CD-ROM drive. The BladeCenter T unit uses USB for internal
communications with these devices.
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
v Hard disk drives
Environment:
v Air temperature:
– Blade server on: 5° to 40° C (41°
to 104° F). Altitude: -60 to 1800
m (-197 to 6000 ft)
– Blade server on (short term): -5°
to 55° C (23° to 131° F). Altitude:
-60 to 1800 m (-197 to 6000 ft)
– Blade server on (short term): 5°
to 30° C (41° to 86° F). Altitude:
1800 to 4000 m (6000 to 13000
ft)
Blade server on (short term): -5°
to 45° C (23° to 113° F). Altitude:
1800 to 4000 m (6000 to 13000
ft)
– Blade server off: -40° to 70° C
(-40° to 158° F)
v Humidity:
– Blade server on: 5% to 80%
– Blade server on (short term): 5%
to 90% but not to exceed 0.024
kg water/kg of dry air
– Blade server off: uncontrolled
Note: Short term refers to a period of
not more than 96 consecutive hours
and a total of not more than 15 days in
1 year. (This refers to a total of 360
hours in any given year, but no more
than 15 concurrences during that
1-year period.
Chapter 2. BladeCenter T unit components
23
Advertisement
Table of Contents
