Table of Contents
Advertisement
3. If you have installed an I/O expansion option on a blade server, communications
The BladeCenter T unit supports a minimum of one hot-swap Ethernet switch
module in switch-module bay 1. All Ethernet and fibre channel switches that are
supported in the BladeCenter chassis are supported in the BladeCenter T chassis.
34
BladeCenter T Types 8720 and 8730: Planning and Installation Guide
from the option are routed to I/O-module bays 3 and 4. You can verify which
controller on the option is routed to which I/O-module bay by performing the test
in note 2, using a controller on the I/O expansion option and a compatible
switch module or pass-through module in I/O-module bay 3 or 4.
Advertisement
Table of Contents
