Table of Contents
Advertisement
BladeCenter HS40 Type 8839 features and specifications for
non-NEBSI/ETSI environment
Table 5 provides a summary of the features and specifications of the BladeCenter
HS40 Type 8839 blade server operating in a non-NEBS/ETSI environment.
Note: Power, cooling, removable media drives, external ports, and advanced
Table 5. HS40 features and specifications for a non-NEBSI/ETSI environment
Microprocessor:
Supports up to 4 microprocessors
v Intel Xeon 2.0 GHz or faster
v L2 and L3 caches, size dependent
on microprocessor
Memory:
v Eight double data rate (DDR)
PC2100 184-pin DIMM sockets
v Minimum: 512 MB
v Maximum: 16 GB¹
v Type: 2-way interleaved, DDR,
PC2100, ECC SDRAM registered
x4 (Chipkill) dual inline memory
modules (DIMMs) only
v Supports 256-MB, 512-MB, 1-GB,
and 2-GB DIMMs
v Hot spare memory
Expansion:
v Two I/0 expansion card connectors
Drives:
v Support for up to two Ultra320
SCSI hot-swap hard disk drives
available in an optional SCSI
storage expansion unit
Notes:
1. You might have to enable large-memory support for your operating system to
2. The operating system in the blade server must provide USB support for the
22
BladeCenter T Types 8720 and 8730: Planning and Installation Guide
system management are provided by the BladeCenter T Types 8720 and
8730.
Size:
v Height: 24.5 cm (9.7 inches)
v Depth: 44.6 cm (17.6 inches)
v Width: 5.9 cm (2.32 inches)
v Maximum weight: 7.0 kg (15.4 lb)
Integrated functions:
v Four Gigabit Ethernet controllers
v ATI Radeon 7000 video controller
v Light path diagnostics
v Local service processor
v IDE controller
v RS-485 interface for
communication with the
management module
v Integrated Baseboard
Management Controller
v USB V2.0 Full Speed ports for
communication with keyboard,
mouse, external diskette drive,
and CD-ROM drive²
v Serial over LAN (SOL)
management interface
Electrical input:
v Input voltage: 12 V dc
access all of the memory that is installed in your blade server. See the
documentation for your operating system for information.
blade server to recognize and use the keyboard, mouse, external diskette drive,
and CD-ROM drive. The BladeCenter T unit uses USB for internal
communications with these devices.
Predictive Failure Analysis (PFA)
alerts:
v Microprocessor
v Memory
v Hard disk drives
Environment:
v Air temperature:
– Blade server on: 10° to 35° C
(50° to 95° F). Altitude: 0 to 914
m (2998.69 ft)
– Blade server on: 10° to 32° C
(50° to 95° F). Altitude: 914 m to
2134 m (2998.69 ft to 7000 ft)
– Blade server off: -40° to 60° C
(-40° to 140° F)
v Humidity:
– Blade server on: 8% to 80%
– Blade server off: 5% to 80%
Advertisement
Table of Contents
