Setting Up The Remote Connection - IBM eServer BladeCenter 8677 Installation And User Manual

Table of Contents

Advertisement

Notes:
1. For best results when using the Web browser, set the monitor to 256 colors.
2. The Web interface does not support the double-byte character set (DBCS)
The Web-based user interface communicates with the management and
configuration program that is part of the firmware that comes with the management
module. You can use this program to perform tasks such as:
v Define the login IDs and passwords
v Select recipients for alert notification of specific events
v Monitor the status of the BladeCenter unit and blade servers
v Control the BladeCenter unit and blade servers
v Access the switch modules to configure them
v Change the drive startup sequence in a blade server
v Set the date and time
v Remote control
v Change ownership of the keyboard, video, and mouse
v Change ownership of the CD-ROM drive, diskette drive, and USB port. (The
Note: The IBM Director program is a system-management product that comes with
You also can use the management and configuration program to view some of the
blade server configuration settings. See "Using the management and configuration
program" on page 44 for more information.

Setting up the remote connection

To configure and manage the BladeCenter unit and blade servers, you must first set
up the remote connection through the Ethernet port on the management module.
40
BladeCenter Type 8677: Installation and User's Guide
Use only the video resolutions and refresh rates given in the following table.
These are the only video resolution and refresh rate combinations that are
supported for all system configurations.
Resolution
640x480
640x480
640x480
640x480
800x600
800x600
800x600
800x600
1024x768
1024x768
languages.
CD-ROM drive and diskette drive in the BladeCenter unit are viewed as USB
devices by the blade server operating system.)
the BladeCenter unit. To configure the remote alert recipients for IBM
Director over LAN, the remote alert recipient must be an IBM
Director-enabled server.
Refresh rate
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
72 Hz
75 Hz
85 Hz
60 Hz
75 Hz

Advertisement

Table of Contents
loading

Table of Contents