Fibre-Channel Switch Module Configuration Planning - IBM 87302RU Planning And Installation Manual

Fibre-channel switch module configuration planning

Fill out the worksheet in this section for each fibre-channel switch module you plan
to have in your BladeCenter T unit. For information on filling out the worksheet, see
"Fibre-channel switch module configuration planning" on page 86 and the
BladeCenter T Fibre Channel Switch Module Installation and User's Guide.
112
BladeCenter T Types 8720 and 8730: Planning and Installation Guide
Chassis name
State
Domain ID
Domain ID lock
Broadcast support
Inband management
R_A_TOV
R_T_TOV
E_D_TOV
IP address
Subnet mask
Gateway
Boot method
Remote logging (syslog)
Logging (syslog) host IP
address
Contact
Location
Read community
Authentication trap
Trap community
Write community
__ Enable Trap 1 configuration
Trap address
Trap port
Trap severity
__ Enable Trap 2 configuration
Trap address
__ Online
__ Offline
__ Enable
__ Enable
__ Enable
Timeout values
IP configuration
_____._____._____._____
_____._____._____._____
_____._____._____._____
__ Static
__ RARP
__ Enabled
_____._____._____._____
SNMP configuration
__ False
_____._____._____._____
__ Unknown
__ Alert
__ Error
__ Notify
__ Debug
_____._____._____._____
__ Test
__ Disable
__ Disable
__ Disable
__ BootP
__ DHCP
__ Disabled
__ True
__ Emergency
__ Critical
__ Warning
__ Info
__ Mark