Wall Mounting; Desk/Table Installation - VTech 5854 User Manual

Installation

Wall Mounting

Your phone base unit is designed to mount on a standard telephone wall plate . Wall mounting
is optional . See position one below for instructions .

Desk/Table Installation

To place your base unit on a desk or table, insert the desk/wall bracket as instructed below and shown
in position one or two, depending on your preference of how you'd like the base unit to be angled .
�
Position One
To mount your phone on a wall, or to place it on a table or desk, refer to the diagrams illustrating
position one .
• First insert the lower portion of the bracket into the grooves in the base, then snap the upper portion
into place .
• Mount the base on the wall by positioning the base unit so the mounting studs will fit into the holes
on the base and wall mount bracket . Slide the base unit down on the mounting studs until it locks
into place .
Position Two
This position is an alternate way to install your phone on a table or desk . Position two allows a different
viewing angle to your handset and base unit . Refer to the position two diagrams above .
• Insert the upper portion of the bracket into the grooves in the base .
• Snap the lower portion into place .
�
www.vtechphones.com GETTING STARTED
7