Fcc, Acta And Ic Regulations - VTech 5854 User Manual

FCC, ACTA and IC Regulations

FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 5 of the Federal Communications Commission (FCC) rules . These requirements are
intended to provide reasonable protection against harmful interference in a residential installation . This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications . However, there is no guarantee that interference will not occur in a particular installation . If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
* Reorient or relocate the receiving antenna .
* Increase the separation between the equipment and receiver .
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected .
* Consult the dealer or an experienced radio/TV technician for help .
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safely absorbed by a user or bystander according to the intended usage of the product .
This product has been tested and found to comply with the FCC criteria . The handset may be safely held against the ear of the user . The base unit shall be installed and used such that parts of the user's
body other than the hands are maintained at a distance of approximately 20 cm (8 inches) or more . If you choose to use a clipping device, please make sure to only use the supplied VTech belt clip .
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA) . The label on the back or bottom of this
equipment contains, among other things, a product identifier in the format US:AAAEQ##TXXXX. This identifier must be provided to your local telephone company upon request.
The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA . A compliant
telephone cord and modular plug is provided with this product . It is designed to be connected to a compatible modular jack that is also compliant . An RJ jack should normally be used for connecting
to a single line and an RJ4 jack for two lines . See Installation Instructions in the user's manual .
The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called . The REN for this product is encoded
as the 6th and 7th characters following the US: in the product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information,
please contact your local telephone company .
This equipment may not be used with Party Lines . If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your
alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected . Repairs to this telephone equipment can only be made by the manufacturer or its
authorized agents . For repair procedures, follow the instructions outlined under the Limited Warranty .
If this equipment is causing harm to the telephone network, the telephone company may temporarily discontinue your telephone service . The telephone company is required to notify you before interrupting
service. If advance notice is not practical, you will be notified as soon as possible. You will be given the opportunity to correct the problem and the telephone company is required to inform you of your right
to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operation, or procedures that could affect the proper functioning of this product. The telephone
company is required to notify you if such changes are planned .
If this product is equipped with a corded or cordless handset, it is hearing aid compatible .
If this product has memory dialing locations, you may choose to store emergency telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test emergency numbers, please:
www.vtechphones.com ADDITIONAL INFO
45