Record Your Announcement; To Review Your Announcement At Any Time; To Delete Your Announcement - VTech 5854 User Manual

Answering System Operation At the Base
• By setting announce only to on or off, you decide which announcement your callers will hear when the
system answers a call (the system comes set for normal answering, with announce only turned off) .
See Set announce only, located in the Feature Summary chart later in this section, to change
your announcement selection .
Enter answering system
f e a t u r e s e t u p a n d
choose a feature to
. . .
Turn answering
system on or off

Record Your Announcement

 . Press MENU until you hear "Record outgoing message ."
2 . Press REC/MEMO . After you hear " N ow recording" followed by a beep, speak toward the base to
record an announcement up to 90 seconds long .
3 . Press PLAY/STOP . The system plays back your recorded message .

To review your announcement at any time:

 . Press MENU until you hear " Record outgoing message ."
2 . Press PLAY/STOP, the system plays the current announcement .

To delete your announcement:

Press DELETE during announcement playback . The system will use the
pre-recorded announcement until you record a new one .
set . .
www.vtechphones.com
Select a feature setting
Record outgoing
announcements,
and memos
Review/change clock setting;
confirm feature settings
• Announcements
less than three
s e c o n d s i n
length will not be
recorded ."
BASIC OPERATION
27