Edit A Number/Name Stored In Speed Dial - VTech 5854 User Manual

Speed Dialing
5 . After you enter the name, press SELECT or PROG. The screen displays ENTER NUMBER .
6 . Enter the telephone number . Use
to enter a pause if necessary .
— OR —
Press REDIAL/PAUSE to display the last number (up to 24 digits long) dialed from this phone .
7 . Press SELECT or PROG to store your entry . The screen displays DISTINCT RING? and the
current setting .
to choose Y (for yes) if you wish the phone to alert you to calls from this number by
8 . Press or
assigning a distinctive ringer after the first ring. Choose N for a normal ringer .
9 . Press SELECT or PROG to confirm. If you chose Y in Step 8, a
entry .

Edit a Number/Name Stored in Speed Dial

 . Press and hold the speed dial location key (-9) of the entry you wish to edit .
2 . When the screen displays the entry you want to edit, press SELECT . Then press
flashes.
SPEED EDIT ERASE
8005959511
3 . Press SELECT . The screen displays the name and number . The cursor appears at the end of the
name . Use , and the dial pad keys to edit the name . Press SELECT to move on to edit the
to backspace and make corrections . Press SELECT to move on to edit the distinctive
number . Use
ring setting . Press or
number by assigning a distinctive ringer after the first ring. Choose N for a normal ringer.
4 . Press SELECT to save the edited information .
to backspace and make corrections . Press REDIAL/PAUSE
01
to choose Y (for yes) if you wish the phone to alert you to calls from this
www.vtechphones.com
will be displayed with the
until EDIT
or
BASIC OPERATION
• If the location is
not empty, your
new entry will be
stored in place
of the old and
will delete the
former entry . Take
caution to not
save over entries
you do not wish to
delete from speed
dial memory .
7