Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 44

Basic Administration of the SPA9000
Using the Interactive Voice Response Unit
SPA9000 Voice System Administration Guide
IVR Action IVR
Menu
Choice
Set Static IP 111
Address
Check Network 120
Mask
Set Network 121
Mask
Check Static 130
Gateway IP
Address
Set Static 131
Gateway IP
Address
Check MAC 140
Address
Parameters
Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
None
Enter value using
numbers on the
telephone key pad.
Use the * (star) key
when entering a
decimal point.
None
Enter IP address
using numbers on
the telephone key
pad. Use the * (star)
key when entering a
decimal point.
None
Notes
DHCP must be disabled
first, or this value is
considered an "Invalid
Option." Hang up the phone
after setting the IP address.
The SPA9000 reboots and
the new address takes
effect. Do not attempt to
use IVR option 110
immediately after changing
the IP address. The old IP
address is reported until
the SPA9000 reboots.
Requires password
IVR announces the current
network mask of SPA.
DHCP must be disabled
first, or this value is
considered an "Invalid
Option."
Requires password
IVR announces the current
gateway IP address of SPA.
DHCP must be "Disable,"
otherwise you hear, "Invalid
Option," if you try to set this
value.
Requires password
IVR announces the MAC
address of SPA in hex
string format.
2
42