Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 117

Administering the SPA400 and Voice Mail Service
Configuring a SPA400 for Voice Mail Service
STEP 6
STEP 7
STEP 8
SPA9000 Voice System Administration Guide
Later you configure each client station for voice mail access to the
NOTE
mail boxes that you create on this page.
Click Save Settings at the bottom of the page.
Restart the SPA400 by completing the following steps:
a. Click Administration tab > Reboot.
b. Click the Restart System button.
c. When the confirmation message appears, click OK. The SPA400 reboots.
Reboot OK
d. When the
To verify your progress, click the Status tab, and verify the following settings:
•
USB status: Mount
•
Voice mail status: OK
•
SPA9000 Registration status: Registered
If the SPA registration status is not Registered, trying powering off the
NOTE
SPA9000 and powering it on again.
. Go to Setup page? message appears, click OK.
SPA400 Status
5
115