Connecting To The Spa9000 Administration Web Server; Saving Or Discarding Changes Spa9000 - Cisco SPA-841 - Sipura VoIP Phone Administration Manual

Basic Administration of the SPA9000

Connecting to the SPA9000 Administration Web Server

Connecting to the SPA9000 Administration Web Server

NOTE
STEP 1
STEP 2
STEP 3

Saving or Discarding Changes SPA9000

SPA9000 Voice System Administration Guide
To connect to the administration web server, perform the following steps.
You should have previously connected and configured the SPA9000 as described
in the SPA9000 Voice System Installation Guide.
Start Internet Explorer on a computer that is on the same network as the SPA9000.
Enter the IP address of the SPA9000.
To find the IP address of the SPA9000, connect an analog telephone to the
NOTE
Phone 1 or Phone 2 port on the
and press **** on the keypad to access the IVR menu. Press 110# to hear the
IP address.
To view administrative features, click Admin Login and then click Advanced. By
default, no password is required. For more information, see
User and Administrator Accounts," on page
ALTERNATIVELY: After starting Internet Explorer, enter: <SPA9000_ipaddress>/
admin/advanced
Changes can be saved or discarded at any time.
•
Changes are submitted only when you click the Submit All Changes button at
the bottom of a page. When changes are saved, the
depending on the type of changes.
•
To discard unsubmitted changes, click the Undo All Changes button at the
bottom of the page.
. Then lift the receiver of the phone
SPA9000
"Setting Passwords for
29.
SPA9000
2
may reboot,
27