Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 241

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Daylight Saving Time
Rule (continued)
FXS Port Input Gain
FXS Port Output Gain
DTMF Playback Level
DTMF Playback Length
The <save-time> value is the number of hours, minutes, and/
or seconds to add to the current time during daylight saving
time. The <save-time> value can be preceded by a negative
(-) sign if subtraction is desired instead of addition. The
<save-time> value is in this format: [/[+|-]HH:[mm[:ss]]]
The <month> value equals any value in the range 1-12
(January-December).
The <day> value equals [+|-] any value in the range 1-31.
If <day> is 1, it means the <weekday> on or before the end of
the month (in other words the last occurrence of < weekday>
in that month).
The <weekday> value equals any value in the range 1-7
(Monday-Sunday). It can also equal 0. If the <weekday> value
is 0, this means that the date to start or end daylight saving is
exactly the date given. In that case, the <day> value must not
be negative. If the <weekday> value is not 0 and the <day>
value is positive, then daylight saving starts or ends on the
<weekday> value on or after the date given. If the
<weekday> value is not 0 and the <day> value is negative,
then daylight saving starts or ends on the <weekday> value
on or before the date given.
The abbreviation HH stands for hours (0-23).
The abbreviation mm stands for minutes (0-59).
The abbreviation ss stands for seconds (0-59).
The default Daylight Saving Time Rule is start=4/1/
7;end=10/-1/7;save=1.
Input gain in dB, up to three decimal places. The range is
6.000 to -12.000.
Default: -3.
Output gain in dB, up to three decimal places. The range is
6.000 to -12.000. The Call Progress Tones and DTMF
playback level are not affected by the <FXS Port Output
Gain>.
Default: -3
Local DTMF playback level in dBm, up to one decimal place.
Default: -16.0
Local DTMF playback duration in milliseconds.
Default: .1
B
239