Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 157

Localization
Configuring the SPA9000 and SPA9xx Call Progress Tones
STEP 2
SPA9000 Voice System Administration Guide
Localize the tones for the phones:
a. Click the PBX Status link.
b. Find the phone that you want to configure, and then click the hyperlink in the
Address
column.
c. Click Regional.
Call Progress Tones
d. In the
Progress Tones by Country," on
e. Click Submit All Changes.
f. Repeat this step as needed for each phone.
Table 2 SPA9000 Call Progress Tones by Country
Australia
Dial Tone
Outside Dial Tone
Prompt Tone
Reorder Tone
Off Hook Warning Tone
Ring Back Tone
Busy Tone
Call Waiting Tone
Confirm Tone
Denmark
Dial Tone
Outside Dial Tone
Prompt Tone
Reorder Tone
Off Hook Warning Tone
section, enter the values from
page155.
400@-19,425@-19;10(*/0/1+2)
420@-16;10(*/0/1)
520@-19,620@-19;10(*/0/1+ 2)
425@-19;*(2.5/.5)
480@-10,620@0;10(. 1 25/. 1 25/1+2)
400@-19,425@-19;*(.4/.2/1+2,.4/2/1+2)
425@-16;10(.375/.375/1)
400@-20;30(0. 1 /2/1)
600@-16;1(.25/.25/1)
425@-10;*(*/0/1)
425@-16;10(*/0/1)
425@-19,620@-19;*(*/0/1+2)
425@-10;*(0.25/0.25/1)
425@-10;*(.2/.2/1,.2/.6/1)
8
IP
Table 2, 'SPA9000 Call
155