Cisco SPA-841 - Sipura VoIP Phone Administration Manual page 217

SPA9000 Field Reference
Voice tab
SPA9000 Voice System Administration Guide
Group 1/2/3/4 Line
Hunt Groups
SIP DIDN Field
SIP DIDN Param Name
Accept All MWI as Line
Phone DLG Refresh Intvl
Ordered comma-separated list of line interfaces. The
SPA9000 attempts to make external calls for group members
in the order in which the lines are listed.
Example:
1,3
When a group member places an outbound call, the
SPA9000 attempts to use Line 1 first. If Line 1 is not available,
the SPA9000 attempts to use Line 3.
By default, this field is blank, meaning that no line can be
seized.
Defines one or more hunt groups that can be called directly
by any client station like a regular extension. The syntax is the
same as <Contact List>. Each defined group extension and
name also appears in the corporate directory. This parameter
is parsed twice by the SPA9000 such that a group member
of one group can also be the extension of another group (that
is, one level of recursion allowed).
Default: blank
Determines which field is used to indicate the DID number for
an incoming INVITE to a line interface. The choices are:
TO UserID—The user-id field of the TO header
TO Param—A parameter in the TO header with the name
specified in <SIP DIDN Param Name>, such as didn=1234
Default: TOUserID
Parameter name to indicate the DID number in an incoming
INVITE message.
Default: didn
Choose the line. Choices are 1, 2, 3, 4, or Current.
Default: Current
Default: 0
B
215