3Com 1102B - NBX Business Phone VoIP Telephone Manual page 69

Hunt groups can be static or dynamic:
If you are in a static hunt group, you are always part of that group
■
along with the other group members.
If you are in a dynamic hunt group, you must log in to the group to be
■
part of it.
To log in to a dynamic hunt group using your NBX Telephone:
1 Pick up the handset.
2 Press the Feature button followed by the hunt group number that is
assigned by your administrator. The ranges of possible hunt group
numbers are shown in
3 Dial the hunt group password, which is assigned by your administrator.
4 Press #.
To log out of a dynamic hunt group using your NBX Telephone:
1 Pick up the handset.
2 Press the Feature button followed by the hunt group number.
3 Hang up the telephone.
Table 11 Hunt Group Numbers (Assigned by the Administrator)
On an NBX 100 system
850 – 879
Your administrator can configure a hunt group to an Access button on an
NBX Business Telephone. To log in to or to log out of the hunt group,
press the specified Access button. The indicator next to the button lights
to show that you are logged in. On the NBX Basic Telephone, the display
panel shows the message IN.
Hunt Groups and Calling Groups
Table 11.
On a SuperStack 3 NBX system
850 – 879
and
900 – 969
69