Table of Contents
Advertisement
48
C
5: S
HAPTER
TANDARD
Disconnecting the
Last Person
That You Called
Setting the Volume
F
EATURES
(NBX 100 and SuperStack 3 NBX only) Use the Conference Drop
feature to disconnect the last person that you add to a conference call.
This feature is helpful if, when you add a party, your call is answered by
someone else.
Only the person who added the last caller to the conference call can
■
drop that caller.
Your administrator can configure any Access button on an NBX
■
Business Telephone or the Attendant Console to be a Conference
Drop button.
On an NBX Basic Telephone, or on an NBX Business Telephone that does
not have a button programmed for Conference Drop:
1 Press the Feature button and 431.
2 The system returns you to the others who are in the conference call.
On any NBX Telephone, use the Volume Control buttons to raise or
lower the volume.
Ring Volume — To raise or lower the volume of the ring, press the up
■
or down Volume Control buttons repeatedly while your telephone
is ringing, until the volume is at the level that you prefer. Ringer
volume is different from ringer tone. See
You can listen to and change the sound of the ringing on your telephone
in NBX NetSet > Ringer Tones. See
NetSet utility.
Handset Volume — To raise or lower the volume of the dial tone or
■
of the sound that you hear on the handset, pick up the handset and
then press the up or down Volume Control buttons repeatedly until
the volume is at the level that you prefer. You can change the volume
during a conversation or by listening to the dial tone.
Speaker Volume (NBX Business Telephones only) — To raise or
■
lower the volume of the speaker when you are using the speaker
phone, press the Speaker button and then press the up or down
Volume Control button repeatedly until the volume is at the level you
prefer. You can change the volume during a conversation or by
pressing Speaker and listening to the dial tone.
"Ringer Tones"
Chapter 1
for how to use the NBX
in
Chapter
6.
Advertisement
Table of Contents
