Option Menu - Yamaha RX-A800 Owner's Manual

OPTION menu

The following items are provided for each input source.
HDMI1-5 Tone Control Adaptive DRC
J2
Dialogue Lift Extended
Surround
AV1-4
Tone Control Adaptive DRC
J2
Dialogue Lift Extended
Surround
AV5-6 Tone Control Adaptive DRC
J2
Dialogue Lift Volume Trim
AUDIO1-2
Tone Control Adaptive DRC
J2
Dialogue Lift Volume Trim
V-AUX Tone Control Adaptive DRC
J2
Dialogue Lift Extended
Surround
TUNER
Tone Control Adaptive DRC
J2
Dialogue Lift Volume Trim
J
1 : When "Tone Control," "Adaptive DRC," "CINEMA DSP 3D Mode,"
"Dialogue Lift," or "Extended Surround" is adjusted for an input source, the
same value is applied to other input sources and "ALL" is displayed on the
front panel display. When settings specific to a certain input source are
selected, the input source name is displayed on the front panel display. If the
name of the input source has been changed (☞p.
SIRIUS Tone Control
J1
Dialogue Lift
DOCK
Tone Control
CINEMA DSP 3D
(iPod)
Mode
Dialogue Lift
Volume Trim
Repeat
CINEMA DSP 3D
DOCK Tone Control
Mode
(Bluetooth)
Volume Trim
Dialogue Lift
Connect/
CINEMA DSP 3D
Disconnect
Mode
MULTI CH Volume Trim
CINEMA DSP 3D
Mode
CINEMA DSP 3D
Mode
Volume Trim
CINEMA DSP 3D
Mode
input source is displayed.
J
2 : "Dialogue Lift" can be adjusted only when the presence speakers are available.
J
3 :
Not available for Yamaha iPod wireless receiver.
79), the original name of the
Configuring settings specific to an individual input source (OPTION menu)
Adaptive DRC CINEMA DSP 3D
Mode
J2
Volume Trim
Adaptive DRC CINEMA DSP 3D
Mode
J2 J3
Volume Trim Shuffle
J3
Adaptive DRC CINEMA DSP 3D
Mode
J2
Volume Trim Pairing
PLAYBACK
■
Adjusting high/low-frequency sound
Tone Control
Input source: All input sources except MULTI CH
You can adjust the balance of the high-frequency range (Treble)
and low-frequency range (Bass) of sounds output from the front
left and right speakers to obtain desired tone.
Adjustable range -6.0 dB to +6.0 dB
Adjustment 0.5 dB
increments
• The tone control of the speakers or headphones can be set
separately. Set the headphone tone control with the headphones
connected.
• TONE CONTROL on the front panel can also be used (☞p. 42).
52
En