Control Function - Yamaha RX-A800 Owner's Manual

■
Receiver operation via TV (HDMI Control)
HDMI Control
Set the HDMI Control function to "On" to operate devices
connected via HDMI. If the TV or other external components
support HDMI Control (e.g., Panasonic VIERA Link), you can use
the remote controls of those devices to operate some of this unit's
functions, and to synchronize this unit with the operation of those
devices.
Refer to "Using the HDMI Control function"
instructions.
Off (Default)
Sets HDMI Control to "Off."
On
Sets HDMI Control to "On."
If this unit is connected to HDMI devices that do not support the
HDMI Control function, these functions will not operate.
■
Selecting an HDMI OUT jack for the HDMI

Control function

Control Select
Select the HDMI OUT jack that utilizes the HDMI Control
function.
Refer to "Using the HDMI Control function"
instructions.
Out1(TV1)
Applies the HDMI Control function for the HDMI
OUT 1 jack.
Out2(TV2)
Applies the HDMI Control function for the HDMI
OUT 2 jack.
J
1 : When the HDMI Control is "On," the Standby Through function is
automatically enabled. When this unit enters standby mode, the audio and
video signals from the last-selected HDMI input source will continue to be
transmitted to the TV. The HDMI input source can only be changed using the
remote control.
■
Listening to TV audio via single HDMI
cable (Audio Return Channel)
ARC (Audio Return Channel)
You can enable or disable the Audio Return Channel function.
When using a TV that supports Audio Return Channel function and
the function is enabled, the TV's audio output is transmit to this
unit via an HDMI cable.
The TV audio input to this unit is regarded as the input source
(☞p. 111) for setting selected in "TV Audio Input."
By means of this function, you do not need to connect the TV's
audio output (digital audio output or analog audio output) to the
unit.
J1
Off (Default)
On
When the TV audio is input to the unit using Audio Return
Channel, "TV" is displayed on the front panel display.
TV
• "ARC (Audio Return Channel)" is enabled only for the HDMI
(☞p. 111) for setting OUT 1 or 2 jack selected with "Control Select."
• Refer to "Single HDMI cable input to TV audio with Audio
Return Channel function"
J
2 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
J2
Sets the Audio Return Channel to "Off."
Sets the Audio Return Channel to "On."
VOL.
SW
AV4
C
L R
SL SR
SBL SBR
(☞p. 113) for setting instructions.
Setting various functions (Setup menu)
■
Selecting an input source to assign audio
input for the TV
TV Audio Input
Select the input source that receives audio signals from TV while
the HDMI Control function is on.
When using a TV that supports Audio Return Channel function and
the function is enabled, the audio input for the TV is assigned to
J2
the input source selected here.
TV1
Audio input AV1-6 or AUDIO1-2
Default setting AV4
TV2
Audio input AV1-6 or AUDIO1-2
Default setting AV1
• "TV Audio Input" is enabled only for the HDMI OUT 1 or 2 jack
selected with "Control Select."
• Refer to "Switching the input source on this unit automatically
when listening to TV audio" (☞p. 112) for instructions.
SETUP
98
En