Yamaha RX-A3000 Owner's Manual page 64

■
Adjusting high/low-frequency sound
Tone Control
You can adjust the balance of the high-frequency range (Treble)
and low-frequency range (Bass) of sounds output from the front
left and right speakers to obtain desired tone.
Adjustable range -6.0 dB to +6.0 dB
Adjustment 0.5 dB
increments
■
Auto-adjusting the sound level to make
even low volumes more audible
Adaptive DRC
Adjusts the dynamic range in conjunction with the volume level
(from minimum to maximum). When this item is set to "On,"
J1
dialogue and sound effects are clearer.
Off (Default)
Does not adjust the dynamic range automatically.
On
Adjusts the dynamic range automatically.
When "On" is selected, the dynamic range is adjusted as follows.
If the volume level is low, the dynamic range is narrow.
If the volume level is high, the dynamic range is wide.
On
On
Off
Off
Input Level Input Level
Volume: low Volume: high
J
1 : "Adaptive DRC" is also effective when you use headphones.
J
2 : AV5-6 or AUDIO1-2 are available when "Audio Return Channel" is on, and
the input source is used for "TV Audio Input."
■
Enjoying more spatial sound fields
CINEMA DSP 3D Mode
When CINEMA DSP 3D is enabled, set whether to use sound
programs in CINEMA DSP 3D mode (☞p.
■
Adjusts the vertical position of dialogues
Dialogue Lift
Adjusts the vertical position of center sound such as dialogues
when presence speakers are used. Increasing this parameter raises
the position.
If the dialog seems to come out from a lower position than the
video monitor screen, increase this parameter.
"0" (default) corresponds to the lowest position and "5" to the
highest position.
Configuring settings specific to an individual input source (Option menu)
• "Dialogue Lift" can be adjusted only when the presence speakers
are available.
• You cannot move the dialog position lower than the default
setting.
56).
■
Selecting the 5.1-channel signal playback
method
Extended Surround
Selects whether to reproduce 5.1-channel input signals in 6.1- or
7.1-channel when surround back speakers are used.
Auto (Default)
The ideal dialog
q PLIIx Movie
position
q PLIIx Music
EX/ES
Move up to the ideal
dialog position
Off
PLAYBACK
J2
Automatically selects the most suitable decoder if a
flag for reproducing surround back channel is present,
and reproduces the signals in 6.1- or 7.1-channel.
Always reproduces signals in 7.1-channel using the
Dolby Pro Logic IIx Movie decoder whether or not
surround back channel signals are contained. You can
select this parameter when two surround back
speakers are connected.
Always reproduces signals in 6.1- or 7.1-channel
using the Dolby Pro Logic IIx Music decoder whether
or not surround back channel signals are contained.
You can select this parameter when one or two
surround back speakers are connected.
Automatically selects the most suitable decoder for
input signals whether or not the flag for reproducing
surround back channel is present, and always
reproduces signals in 6.1-channel.
Always reproduces original channels whether or not
the flag for reproducing surround back channel is
present.
64
En