Yamaha RX-A3000 Owner's Manual page 46

SOURCE RECEIVER
8 Replace the optimizer microphone at your
choosing position and press
AV
restart the automatic measurement.
1 2 3 4
5 6 7 V-AUX
Auto measurement restarts in 10 seconds.
AUDIO
1 2 3 4
PHONO MULTI USB NET
The following illustration shows how to place the
DOCK TUNER SIRIUS
[ A ]
optimizer microphone to optimize the setup of this
unit for eight listening positions for example. Up to 8
listening positions can be measured.
i
ENTER ENTER
Repeat step 8 until the measurement at all listening
positions are made.
The calculation based on result of measurement starts
when measurement at the last position finishes without
any problem.
J
1 : Measure from the most frequent listening position, such as
directly in front of the TV, first.
When "Angle" is set to "No" in step 6
The following display appears when the calculation
iENTER to
finishes without any problems.
J1
8
6 7
Go to step 14.
4 5
2 1 3
When "Angle" is set to "Yes" in step 6
The following display appears when the calculation
finishes without any problems.
Go to step 9.
YPAO
M e a s u r e . F i n i s h
S a v e / E x i t
YPAO
A n g l e M e a s u r e ?
> Y e s N o
CONNECTIONS
Setting up the speaker parameters automatically (YPAO)
iCursor D / E
9 Press to select "YES" and
press iENTER.
The following display appears.
VOLUME
YPAO A n g l e : P o i n t 1
E N T E R t o S t a r t
VOLUME
VOLUME
Continues to the
next page
46
En