Yamaha RX-A3000 Owner's Manual page 124

■
Selecting an input source to assign audio
input for the TV
TV Audio Input
Select the input source that receives audio signals from TV while
the HDMI Control function is on.
When the TV is set to output sounds via this unit, the TV audio
input is automatically selected to the input source assigned
J1
here.
TV1
Audio input AUDIO1-4
Default setting AUDIO1
TV2
Audio input AUDIO1-4
Default setting AUDIO3
• "TV Audio Input" is enabled only for the HDMI OUT 1 or 2 jack
selected with "Control Select."
• Refer to "Switching the input source on this unit automatically
when listening to TV audio" (☞p. 149) for instructions.
J
1 : While the Audio Return Channel function is on, the jack selected for the input
source cannot be used.
■
Specify whether or not audio signal is
output through this unit and a TV
connected via the HDMI OUT jack
Audio Output
Choose whether audio from an external component, such as a BD/
DVD player, connected via HDMI is played back through this unit
or through a TV.
Amp
Specify whether or not audio signal is output through this unit.
Off
Audio is not output through this unit.
On (Default) Audio is output through this unit. When this setting is
selected, audio from the external component is output
in a format compatible with this unit.
OUT1
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 1 jack.
Off (Default)
Audio is not output through a TV connected via the
HDMI OUT 1 jack.
On
Outputs audio through a TV connected via the HDMI
OUT 1 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
OUT2
Specify whether or not audio signal is output through a TV
connected via the HDMI OUT 2 jack.
Off (Default) Audio is not output through a TV connected via the
HDMI OUT 2 jack.
On
Outputs audio through a TV connected via the HDMI
OUT 2 jack. When this setting is selected, audio from
the external component is output in a format
compatible with the TV.
Setting various functions (Setup menu)
When "HDMI Control" is set to "On," the settings of "Amp"
and the HDMI OUT jack (OUT1 or OUT2) selected with
"Control Select" are interlocked with "HDMI Control."
■
Transmitting HDMI audio/video to the TV
during standby mode (Standby Through)
Standby Through
This function allows audio/video signals from HDMI inputs to
continue to be transmitted to a TV when this unit is in standby
mode.
When the Standby Through function is " On ," audio/video signals
continue to be output to the TV from the last HDMI
The HDMI input source can be
before this unit enters standby mode.
dAV1-7 dV-AUX
selected using or in standby mode.
Off (Default)
Sets Standby Through to "Off."
On
Transmits audio/video signals from the selected
HDMI input source to the TV.
• When "HDMI Control" is "On," Standby Through function is
automatically enabled and "Standby Through" is not displayed.
• When the Standby Through function is on, the HDMI Through/
iPod Charge indicator on the front panel lights during the standby
mode. This unit consumes 2 to 5 W of power.
• Input source can be selected during Standby Through.
SETUP
input source
124
En