Controlling Zone2, Zone3 Or Zone4 - Yamaha RX-A3000 Owner's Manual

SOURCE RECEIVER
l

Controlling Zone2, Zone3 or Zone4

The remote control can be used to select and control
AV
1 2 3 4 4
Zone2, Zone3 or Zone4 devices. The available
5 6 7 V-AUX
operations are as follows:
AUDIO
d
1 2 3 4
• Selecting the input source of Zone2, Zone3 or Zone4.
PHONO MULTI USB NET
• Tuning into FM or AM when "TUNER" is selected as the
DOCK TUNER SIRIUS [ A ]
input source of Zone2, Zone3 or Zone4.
SCENE
e
1 2 3 4 • Tuning into SIRIUS Satellite Radio when "SIRIUS" is
selected as the input source of Zone2, Zone3 or Zone4.
• Adjust the volume of Zone2, Zone3 or Zone4 devices
(when connected via the built-in amplifier).
■
Activating the Zone2, Zone3 or
Zone4 operation mode
DZONE
Press to ZONE2, ZONE3 or ZONE4 before
attempting to use the remote control to control Zone2,
Zone3 or Zone4 devices.
■
Operating Zone2, Zone3 or Zone4
CATEGORY
To enable and disable the audio output to
Zone2, Zone3 or Zone4
TUN./CH
lRECEIVER
Press
A
SLEEP
D
ZONE
To select an input source for Zone2, Zone3 or
Zone4
Press
Only the following sources are available for
the Zone2 or Zone3
AV1-4 (only analog audio input), V-AUX (only
analog audio input), AUDIO1-4 (only analog audio
input), PHONO, USB, NET, DOCK, TUNER,
SIRIUS
Only the following sources are available for
the Zone4
AV1-4 (only COAXIAL/OPTICAL input), V-AUX
(only OPTICAL input), AUDIO1-2 (only COAXIAL/
OPTICAL input)
To use SCENE function for Zone2, Zone3 or
Zone4
Press and hold
register the current setting to the scene.
Press
A.
The following settings can be registered for
each scene of the Zone2 or Zone3
Input, Master Volume, Tone Control
The following settings can be registered for
each scene for Zone4
Input
To enable the sleep timer for Zone2, Zone3 or
Zone4
Automatically switch the Zone2, Zone3 or Zone4 device
to standby mode after a specified period of time has
elapsed (sleep timer). Press
specify a time for the sleep timer function.
dInput selector.
eSCENE
key for about 3 seconds to
eSCENE
key to load the registered setting.
ASLEEP
repeatedly to
120min. 90min.
Off 30min. 60min.
SETUP
Enjoying the contents in another room
■
Adjusting Zone2, Zone3 or Zone4
high-/low-frequency sound (Tone
Control)
Press ZONE CONTROL on the front panel.
1
Press TONE/BALANCE on the front panel
2
repeatedly to select "Treble" or "Bass."
Press PROGRAM l / h to adjust the output
3
level in the applicable frequency range.
Adjustable range -10.0 dB to +10.0 dB
Adjustment 2.0 dB
increments
The display returns to the previous display soon after the
key is released.
En
154