Yamaha RX-A3000 Owner's Manual page 23

■
Connecting the subwoofers
Connect the subwoofer input jack to the
1
SUBWOOFER 1 and/or 2 jack on this unit with an
J1
audio pin cable.
2 Set the subwoofer volume as follows.
Volume: Set to approximately half volume (or slightly less than
half).
Crossover frequency (if available): Set to maximum.
CROSSOVER/
VOLUME HIGH CUT
MIN
MIN MAX
Subwoofer examples
NOTE
After connection, applying this setting to this unit is required to
activate all speaker connections. With using "Power Amp
Assign" function, you can easily apply the speaker
configuration.
Refer to "Power Amp Assign" (☞p. 116) for details on using
"Power Amp Assign" function.
J
1 : When using the only one subwoofer, connect the subwoofer to the
SUBWOOFER1 jack.
MAX
CONNECTIONS
Connecting speakers
23
En