Accessing The Hcf From The Client Workstation - Xerox Document Centre 50 User Manual

From the client workstation, you should add the
HCF to the available device options.
This procedure must be repeated at each client
workstation.
Even when the HCF is installed, you should use
AutoSelectTray as the default tray. The printer
2
will automatically select the HCF for the job if it
contains the requested paper.
You can also check the Status of the HCF from the
web client, as you can for any other paper tray.
3
1
From the Start menu, select Settings, then
Printers, and the desired printer.
2
From the File menu, select Properties.
4
3
Select the Device Options tab.
4 From the Installable options scroll menu, select
Tray 6 (High Capacity Feeder).
5
From the "Change setting for Tray 6 (High
Capacity Feeder)" menu, select Installed.
12
5
6
Click OK and close the Printers window.
6
7
ACCESSORIES

Accessing the HCF from the client workstation

Windows 98/95
12–6 DOCUMENT CENTRE CS 50 USER GUIDE