Xerox Document Centre 50 User Manual page 169

NOTE: Keep the following notes in mind when
using covers:
•
The Repeat Image and Transparency
Separators options are not available with the
Covers feature.
•
The Covers feature is not available on
machines without a Sorter.
•
You must select "Collated" for Covers jobs.
•
You cannot select Tray 5 for Covers jobs.
•
The paper size and orientation must be the
same for the whole job.
•
For 1-sided covers with images, the machine
uses the first image of your original set as the
front cover and the last image as the back
cover.
•
For 2-sided covers with images, the machine
uses the first two images of your original set
for the front cover and the last two images for
the back cover. If you require a blank inside
front or back cover, you must insert a blank
original sheet into the set of originals. For
example, for a blank inside front cover, insert
a blank sheet immediately after it. For a blank
inside back cover, insert a blank sheet
immediately before it.
DOCUMENT CENTRE CS 50 USER GUIDE 7–15
1
2
3
4
5
6
7
OUTPUT FORMATS