Paper Trays 1, 2, 3, And 4 - Xerox Document Centre 50 User Manual

Paper Trays 1, 2, 3, and 4 hold the paper supply
for the Document Centre ColorSeries 50 color
copier/printer.
Paper Tray 1, illustrated in Figure 1, can
accommodate 8.5 x 11 inch, A4, B5, or A5 paper.
Paper Trays 2, 3, and 4, illustrated in Figure 1, can
9
2
accommodate an assortment of standard paper
sizes, from 8 x 10 inch through 17 x 11 inch, and
B5 through A3.
KEY POINT: Paper Trays 2, 3, and 4 can handle
normal weight papers from 64 - 105 gsm (16lb -
28lb bond). Paper Trays 2, 3, and 4 can also
handle limited, heavyweight papers from 105 -
3
128 gsm (28lb - 32lb) if they are specifically set to
"Heavyweight" in Tools mode (See chapter 3 of
the System Administration Guide).
Trays 2, 3, and 4 have width and length
adjustment guides that should be adjusted if the
paper size in the tray needs to be changed.
NOTE: Paper Trays 2, 3, and 4 can
accommodate SRA3 and 12 x 18 inch paper
4
through a special, optional tray setup procedure
performed by a Xerox service representative. If
you are interested in this capability, contact your
Xerox service representative.
Refer to the Recommended Materials List and the
Color Materials Usage Guide for more information
about the materials you can use in Paper Trays 1,
2, 3, and 4.
5
6
7
PAPER

Paper Trays 1, 2, 3, and 4

Tray 5
Tray 1
Tray 2
9–2
Tray 3
Figure 1: Paper Trays
DOCUMENT CENTRE CS 50 USER GUIDE
Tray 4