Variable Color Balance - Xerox Document Centre 50 User Manual

The Variable Color Balance feature (Figure 38)
allows you to adjust the balance between colors
and the overall amount of color on the output
copies.
Variable Color Balance provides you with the
maximum range of color control available. You
can adjust the levels of all four process colors
2
(Yellow, Magenta, Cyan, and Black) for areas of
high, medium, and low density on the output
copies. Three higher settings, three lower
settings, and the normal (medium) settings are
available for each density level of each color.
Each density level and each color can be adjusted
independently, and you can use any combination
of adjustments.
3
Three different settings for Variable Color Balance
using Magenta are illustrated in Figure 39, Figure
40, and Figure 41.
KEY POINT: It is important to remember that
adjusting the amount of any of the process colors
has an effect on the other colors.
4
5
6
6
7
IMAGE QUALITY

Variable Color Balance

Figure 38: Variable Color Balance feature
Figure 40: Maximum magenta
Figure 41: Minimum magenta
6–24
Figure 39: Normal
DOCUMENT CENTRE CS 50 USER GUIDE