Microsoft Network (Smb); Preparations; Configuration Procedure; Overview - Xerox 4112 System Administration Manual

Microsoft Network (SMB)

Preparations

Configuration procedure

X er o x 4 112 /4 1 27 C o pi e r /P r i n te r S y s t em A d m i ni s tr at i on G u i d e
The following items are required when using a Microsoft Network
(SMB):
• Network environment where either TCP/IP or NetBEUI can be
used.
• The "CentreWare Utilities" CD-ROM, which is included with
this product.

Overview

The machine can be connected to computers using Microsoft
Networks (SMB).
Depending on the network environment, the machine may need to
be configured with an IP address, subnet mask and gateway
address. Confirm with the network administrator and set up the
necessary items.
The following is the procedure to connect the machine to a
Microsoft Network (SMB):
• Configuration on the Machine: Enable the SMB port on the
machine.
• Configuration on the Computer: Install the print driver.
2. Co n fi g ur a ti o n
2-5