Snmp - Xerox 4112 System Administration Manual

3. U s i ng C e nt r eWa r e I nt er n e t S er v i c e s

SNMP

3- 1 4
Reflect the values as the machine's setting values.
9.
a. Click the Apply New Settings. A screen to enter the user
name and password will be displayed.
b. Enter the System Administrator UserID and password into
User Name and Password, and then click OK.
NOTE: The default User ID value is 11111 and password is x-
admin.
c. The right frame on the web browser will change to the
machine reboot display.
d. Click Reboot. The machine will reboot and the setting
value will be reflected.
This section describes the settings for SNMP.
NOTE: When using the CentreWare software to manage the
machine by remote control, enable the SNMP port.
Connect to CentreWare (See Chapter 3 Connect to
1.
CentreWare Internet Services from a computer. on page 3-3).
Click the Properties tab.
2.
Click + on the left of Connectivity and + on the left of
3.
Protocols to display the items in the folder.
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e