Power On/Off; Powering On; Powering Off - Xerox 4112 System Administration Manual

1. P r o d uc t O v e r v i ew

Power on/off

Powering on

Powering off

1- 1 4
Switch the power on before operating the machine. The machine
will take about 5 minutes to warm up before you can start making
copies after the power is switched on.
Turn the machine off at the end of the day or when it is not in use
for a long period of time. Use the Power Saving feature when the
machine is not in use for a while to reduce power consumption.
Refer to the Power Saver Mode section on the next page for more
information.
NOTE: If the power is off, all functions of the machine will stop.
Open the cover and press the power switch to the [
1.
to turn the power on.
NOTE: The "Please wait..." message indicates that the machine is
warming up. The machine cannot be used while it is warming up.
KEY POINT: Switching the machine power off may cause loss of
data being processed.
Before turning the power off, make sure that all copy or print
1.
jobs have completely finished. Also, make sure that the
Online indicator is not lit.
KEY POINT: Never turn the power off in the following
instances:
– While data is being received
– While data is being sent (FTP/SMB/e-mail)
– While jobs are being printed.
– While jobs are being copied
Xe r o x 4112 /4 1 27 Co p ie r / P r in t er S y s te m Ad m i ni s t r at i on G ui d e
] position
|