Message Window Display - VTech i5888 User Manual

MESSAGE WINDOW DISPLAY

WINDOW DISPLAYS:
0
1 - 9 8
0 - 9 9 < - >
Counting 1 to 9 9
9 9 , flashing
1 - 8 , steadily for
one second
4 0 - 9 9
A
O n or O F , steadily for
one second
normal display
C L < - >
_ _
_, flashing
_
Connect with the Answering System from a Remote Location
You can access many features of this system remotely from a touch tone phone.
1 Dial your telephone number.
2 When the system answers, enter your Remote Access Code (preset to 50).
The system beeps once and then announces the number of new messages.
3 Enter a remote command (see "Remote Access Commands" on page 42).
4 Press * 0 to exit remote operation.
Voice Menu
The system has voice prompts to help you with remote operation.
Press * 5 to hear the menu while remotely connected to the answering system.
WHEN:
No messages in any mailbox
In idle mode, the total number of messages/
memos in all mailboxes.
During message playback, the order number
of the message being played.
Memory is full, or total number of messages
F
is 99.
Duration(in seconds) of announcement or memo
recording
Length of recording is more than 99 seconds.
Indicates volume level selected when
VOLUME
Current Remote Access Code (40–99)while
setting
Announce Only mode
Displayed when any setting is changed
from on or off
Day and Time need to be set
System is answering a call or is in remote
operation
System is in programming mode or initializing
Answering System Operation
or VOLUME
41
is pressed