Call Screening/Intercept; Record A Memo; Message Window Display - VTech t 2453 Manual

Answering System Operation

Call Screening/Intercept

1. Make sure the answering system is on, and set the message playback vol-
ume control above level 1 so you can hear the caller' s message.
2. If you decide to take the call, press PHONE on the handset.
3. If you pick up an extension phone during the announcement and the
announcement does not stop right away, press and release the telephone
switchhook.

Record a Memo

You can record a memo up to four minutes long, which is stored as an incom-
ing message.
1. Press and release REC/MEMO.
2. Press a MAILBOX button to select a mailbox for the memo. After the
beep, speak toward the microphone. The message window displays
the length of your memo.
3. To stop recording, press the MAILBOX button again.

Message Window Display

Window Display: when:
0
1 - 99
0 - 99 F
1 99
to (Counting)
99
(flashing)
1 8
- (on steady for
one second)
40 99
-
A
On OFF
or (steady for Displayed when any setting is changed from on or
one second)
CL
--
-- (flashing)
No messages in any mailbox
Total number of messages in all mailboxes, or
message number during message playback.
Memory is full, or total number of messages is 99
Duration of memo recording.
Length of recording is more than 99 seconds.
Indicates volume level selected when VOL-
or VOL+ is pressed.
Current Remote Access Code while setting.
Announce Only mode.
off.
Clock needs to be set.
System is answering a call or is in remote operation.
System is in programming mode or initializing.
27
At The Base