Feature Summary - VTech i5888 User Manual

Answering System Operation
the system announce the feature you want to set. Refer to the Feature
Summary chart below for a description of the features and your choices.
3 Press CHANGE to hear the current setting. Continue to press CHANGE
to adjust the current setting.
4 Press TIME/SET to confirm your setting.
5 Press MENU to move on to the next feature, or press a MAILBOX key to
exit Feature Setup.
Use the 4-Way Multi-Function Selector to program the following features. For
more information about this selector, see page 36.

FEATURE SUMMARY

SYSTEM ANNOUNCES:
ì Set Security codeî
50*
ìSet Audible Message Alertî
Off *
On
ìSet Announce Onlyî
Off*
On
ìSet Call Screeningî
Off
On*
ìSet Number of Ringsî
2
4*
6
Toll Saver
• NOTE: Exit Feature Setup at any time by pressing a MAILBOX button.
Default settings indicated by * .
DESCRIPTION/DIRECTIONS:
Set the remote access code you will use
to access features and functions of the
answering system from a touch tone
phone. The code can be changed to any
two-digit number from 40–99.
When Message Alert is turned ON, the base
beeps once every 10 seconds when new
messages have been received.
When you turn Announce Only ON, callers
hear your announcement, but cannot leave
a message.
When you turn Call Screening OFF, you will
not hear incoming messages as the caller
leaves them.
Choose how many times the phone will ring
before the system answers a call. With Toll
Saver active, the system answers after two
rings when you have new messages and
after four rings when you have no new
messages.
38