Answering System Operation
REMOTE ACCESS COMMANDS
FUNCTION:
Play messages
in a mailbox
Repeat a message
Skip a message
Stop
Save messages
Delete message
Review announcement
Record announcement
Record memo
End remote access call
Turn system off
Turn system on
• NOTE: If no key is pressed within 10 seconds of entering remote access code,
the voice menu will be announced. After the voice menu announcement, if no key
is pressed within 20 seconds, the remote access call will automatically end.
COMMAND:
Press # , then enter the appropriate mailbox
number(1 , 2 , or 3 ). The system plays
new messages. If there are no new messages,
the system plays old messages.
Press #4 while message is playing; each
press backs up another message.
Press #6 while message is playing; each
press advances another message.
Press #5 .
Hang up.
Press #9 while message is playing.
Press #7 ; system plays announcement,
then beeps.
Press *7 ; after beep, record announcement,
press #5 to stop.System plays back
announcement.
Press *8 ; then mailbox number where
you want memo recorded; speak after
beep; press #5 to exit.
Press *0 .
P r e s s # 0 ; t h e s y s t e m a n n o u n c e s ,
"Answering machine off." Press #0 again
to turn the system back on.
When system is off, it answers after 10
rings and announces,"Please enter your
security code." Enter your remote access
code.
42