Vivotek IP8132 User Manual page 71

Video Quality Settings
Click the stream item to display the detailed information� This Network Camera offers real-time H�264,
MPEG-4 and MJEPG compression standards (Triple Codec) and multiple streams for real-time viewing�
If H.264 / MPEG-4 mode is selected, the video is streamed via RTSP protocol� There are four parameters
for you to adjust the video performance:
■ Frame size
You can set up different video resolution for different viewing devices� For example, set a smaller
frame size and lower bit rate for remote viewing on mobile phones and a larger video size and a higher
bit rate for live viewing on web browsers� Note that a larger frame size takes up more bandwidth�
■ Maximum frame rate
This limits the maximum refresh frame rate per second� Set the frame rate higher for smoothlier video
quality�
If the power line frequency is set to 50Hz, the frame rates are selectable at 1fps, 2fps, 3fps, 5fps,
8fps, 10fps, 15fps, 20fps, and 25fps� If the power line frequency is set to 60Hz, the frame rates are
selectable at 1fps, 2fps, 3fps, 5fps, 8fps, 10fps, 15fps, 20fps, 25fps, and 30fps� You can also select
Customize and manually enter a value� The frame rate will decrease if you select a higher resolution�
Advanced Mode
VIVOTEK
User's Manual - 71