Vivotek IP8132 User Manual page 75

VIVOTEK
A green bar indicates that even though motions have been detected, the event has not been triggered
because the image variations still fall under the defined threshold.
Percentage = 30%
If you want to configure other motion detection settings for schedule mode, please click Profile to open
the Motion Detection Profile Settings page as shown below. A total of three motion detection windows
can be configured on this page as well.
Video(TCP-AV) 2011/01/17 13:44:17
Please follow the steps below to set up a profile:
1� Create a new motion detection window�
2� Check Enable this profile�
3� Manually enter a time range for Schedule mode�
4� Click Save to enable the settings and click Close to exit the page�
This motion detection window will also be displayed on the Event Settings page� You can go to
Application > Event Settings > Trigger to choose it as a trigger source� Please refer to page 83 for
detailed information�
User's Manual - 75