Vivotek IP8132 User Manual page 68

VIVOTEK
automatically provide the necessary light compensation�
You can click Preview for a glimpse of expected results, or click Restore to recall the original settings
without incorporating the changes� When completed with the settings on this page, click Save to enable
the settings and click Close to exit the page�
If you want to configure another sensor setting for a scheduled mode, please click Profile to open the
Sensor Settings Profile Settings page as shown below.
2011/01/17 13:44:17
Please follow the steps below to setup a profile:
1� Check Enable this profile�
2� Enter a range of time for the Schedule mode�
3� Configure Exposure settings in the second column� Please refer to the previous page for detailed
information�
4� Click Save to enable the setting and click Close to exit the page�
68 - User's Manual