Vivotek IP8132 User Manual page 136

VIVOTEK
7.20 System log
Group: syslog
NAME
enableremotelog
serverip
serverport
level
7.21 SNMP
Group: snmp (capability.protocol.snmp > 0)
NAME
v2
v3
secnamerw
secnamero
authpwrw
authpwro
authtyperw
authtypero
encryptpwrw
encryptpwro
encrypttyperw
encrypttypero
rwcommunity
rocommunity
136 - User's Manual
VALUE SECURITY
(get/set)
<boolean> 6/6
<IP address> 6/6
514, 1025~65535 6/6
0~7 6/6
VALUE SECURITY
(get/set)
0~1 6/6
0~1 6/6
string[31] 6/6
string[31] 6/6
string[8~128] 6/6
string[8~128] 6/6
MD5,SHA 6/6
MD5,SHA 6/6
string[8~128] 6/6
string[8~128] 6/6
DES 6/6
DES 6/6
string[31] 6/6
string[31] 6/6
for port forwarding
DESCRIPTION
Enable remote log.
Log server IP address.
Server port used for log.
Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
DESCRIPTION
SNMP v2 enabled. 0 for disable, 1 for enable
SNMP v3 enabled. 0 for disable, 1 for enable
Read/write security name
Read only security name
Read/write authentication password
Read only authentication password
Read/write authentication type
Read only authentication type
Read/write password
Read only password
Read/write encryption type
Read only encryption type
Read/write community
Ready only community