Application
Advanced Mode
This section explains how to configure the Network Camera to responds to particular situations
(event)� A typical application is that when a motion is detected, the Network Camera sends
buffered images to an FTP server or e-mail address as notifications.
As shown on the right, an event can be triggered
by many sources, such as motion detection,
(Passive Infra Red motion detector - IP8133 &
IP8133W), or external digital input devices� When an
event is triggered, you can specify what type of action
that will be performed. You can configure the Network
Camera to send snapshots or videos to your email
address or FTP site�
Event Trigger
PIR
ex. Motion Detection,
Digital Input,
System Reboot
Media
(what to send)
ex. Snapshot, Video Clips,
System Log, Digital Output
VIVOTEK
Action
Server
(where to send)
ex. Email, FTP, HTTP Server,
Network Storage
User's Manual - 81