Vivotek IP8132 User Manual page 92

VIVOTEK
Video clip: Select to send video clips when a trigger is activated.
■ Source: Select any of the video streams as a source of video clip.
■ Pre-event recording
The Network Camera has a buffer area; it temporarily holds data up to a certain limit� Enter a number
to decide the duration of recording before a trigger is activated� Up to 9 seconds can be set�
■ Maximum duration
Specify the maximum recording duration in seconds� You can record an event-triggered video for up to
20 seconds�
For example, if pre-event recording is set to 5 seconds and the maximum duration is set to 10
seconds, the Network Camera continues to record for another 4 seconds after a trigger is activated�
■ Maximum file size
Specify the maximum file size allowed.
■ File name prefix
Enter the text that will be appended to the front of the file name.
For example:
Video
File name prefix
Click Save to enable the settings, then click Close to exit the page�
System log: Select to send a system log when a trigger is activated.
Click Save to enable the settings, then click Close to exit the page�
When completed, click Save to enable the settings and click Close to exit this page� The new media
settings will appear on the Event Settings page�
92 - User's Manual
1 sec. 2 sec. 3 sec. 4 sec. 5 sec.
Clip_20110117_100341
Date and time suffix
The format is: YYYYMMDD_HHMMSS
6 sec. 7 sec. 8 sec. 9 sec. 10 sec.
Trigger Activation