Vivotek IP8132 User Manual page 139

eptz
npreset
protocol_https
protocol_rtsp
protocol_sip
protocol_maxconnectio
n
protocol_maxgenconne
ction
protocol_maxmegacon
nection
protocol_rtp_multicast_
scalable
protocol_rtp_multicast_
backchannel
protocol_rtp_tcp
0, 0/7
<positive integer>
0, 0/7
<positive integer>
< boolean > 0/7
< boolean > 0/7
<boolean> 0/7
<positive integer> 0/7
<positive integer> 0/7
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
support), 1(support)
Bit 3 => Support tilt operation; 0(not
support), 1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
A 32-bit integer, each bit can be set
separately as follows:
Bit 0 => stream 1 supports ePTZ or not.
Bit 1 => stream 2 supports ePTZ or not.
The rest may be deduced by analogy
Number of preset locations.
Indicate whether to support HTTP over
SSL.
Indicate whether to support RTSP.
Indicate whether to support SIP.
The maximum allowed simultaneous
connections.
The maximum general streaming
connections.
The maximum megapixel streaming
connections.
Indicate whether to support scalable
multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
VIVOTEK
User's Manual - 139